Highline Pewter HPB Light Switches, Plug Sockets, Dimmers, TV, Fuse, Cooker, USB

Highline Pewter HPB Light Switches, Plug Sockets, Dimmers, TV, Fuse, Cooker, USB. Part of the G&H Highline Plate range. The Highline plate is an elegant low profile design with a raised height of only 4.5mm. It offers a smooth, contemporary look without all the fixing problems associated with the Flat plate designs and is manufactured from high quality 1.5mm solid brass. Due to the smaller than average size, these plates are also suitable for mounting onto dual back boxes.

The plate is made from brass and then coated in a satin nickel finish. All G&H plates are manufactured to the highest standard from solid brass or steel and are covered by a 1 year guarantee. All plates come supplied with two screws coloured to suit the plate.

The entire range fits into UK standard wall boxes (see below for depth recommendations). Plate size: 85mm x 85mm (1 gang, 2 gang & 3 gang) Plate size: 145mm x 85mm (4 gang) Use as 1 or 2 way (1 gang intermediate also available) Required back box depth: 25mm or deeper Rated Amps: 10A. Plate size: 85mm x 85mm (1 gang & 2 gang) Plate size: 145mm x 85mm (3 gang & 4 gang) Use as 1 or 2 way (1 gang intermediate also available) Required back box depth: 25mm or deeper Rated Amps: 10A.

Single & Double Plug Sockets. Plate size: 85mm x 85mm (single) Plate size: 145mm x 85mm (double) Required back box depth: 25mm or deeper (recommend 35mm unless box is sunk into wall) Rated Amps: 13A DP. USB Chargers: 1 side 1A & 1 side 2.1A. Push on/off and turn to dim. Plate size: 85mm x 85mm (1 gang & 2 gang) Plate size: 145mm x 85mm (3 gang & 4 gang) Required back box depth: 35mm or deeper 400W: 40w minimum load, 400w maximum load.

Halogen Only 700W: 150w minimum load, 700w maximum load. Halogen Only LED: 1 to 10 LED bulbs (max 120W). 300W max load if used with halogen bulbs. Use as 1 or 2 way (2 way only with an on/off switch).

Plate size: 85mm x 85mm Required back box depth: 25mm or deeper Rated Amps: 20A DP (Double Pole). Plate size: 85mm x 85mm (single) Plate size: 145mm x 85mm (double with 13A socket) Required back box depth: 35mm or deeper Rated Amps: 45A DP (Double Pole). Plate size: 145mm x 85mm Required back box depth: 47mm Rated Voltage: 115V240V AC. 2 & 5 Amp Sockets. Plate size: 85mm x 85mm Required back box depth: 25mm or deeper Rated Amps: 2A / 5A.

TV, Satellite, RJ45, BT, Fuse, Flex, Triax, Phono & Fan Isolator Sockets. Plate size: 85mm x 85mm Required back box depth: 25mm or deeper. Plate size: 85mm x 85mm (single) Plate size: 145mm x 85mm (double) These are empty designed for modular inserts to clip in.

Required back box depth: Depends on module type. Plate size: 85mm x 85mm (single) Plate size: 145mm x 85mm (double) Required back box depth: 16mm or deeper. Damaged or Faulty Goods We aim to provide the highest level of service to our customers. Please note, we will only send out a replacement item on receipt of the faulty/damaged item. Returning Unwanted Goods We value our customers greatly and aim to provide the highest possible level of service.

Every effort will be made to deliver the goods as soon as possible after your order has been paid for. Where possible we will always send a replacement part rather than change the whole item as this allows us to resolve the issue immediately. We will action all problems as quickly as possible, we pride ourselves on our customer service, both pre-sale and post-sale.

The item "Highline Pewter HPB Light Switches, Plug Sockets, Dimmers, TV, Fuse, Cooker, USB" is in sale since Wednesday, March 6, 2019. This item is in the category "Home, Furniture & DIY\DIY Materials\Electrical Supplies\Power Strips & Surge Protectors".

The seller is "ashdownhomestore" and is located in Crawley. This item can be shipped worldwide.

MPN: Does not apply
Brand: G&H Brassware