Lutron GRX-3106 Grafik Eye 6 Zone Dimming Scene Control

  
Provides pushbutton recall of four preset lighting scenes, plus Off. Allows setup of lighting scenes using buttons on the Control Unit. Controls many light source types directly, and others using power interfaces. Provides lockout options to prevent accidental changes. Includes built-in infrared receiver for operation with an optional remote control.

Accept 120 V, 220-240 V (non-CE), 230 V CE and 100 V input power. Control two to six zones of lighting. Provide setup using buttons on the Control Unit. Provide optional setup using a PC, including setting lighting levels in 1% increments. 120 V, 220-240 V (non-CE), 230 V (CE) or 100 V, 50/60Hz.

Lightning Strike Protection: Meets ANSI/IEEE standard 62.41-1980. Can withstand voltage surges of up to 6000 V and current surges of up to 3000 A. Controls the following lighting sources with a smooth, continuous Square Law dimming curve or on a full conduction non-dim basis.

Incandescent, Tungsten, Magnetic Low Voltage Transformer. Controls the following lighting sources with a smooth continuous Square Law dimming curve through separate power interfaces. Lutron Electronic Fluorescent Dimming Ballast.

4 preset lighting scenes and off are accessible from the Control Unit front panel. 12 additional scenes are stored in the Control Unit. These scenes are accessible via Wallstations and/or Control Interfaces. Light levels fade smoothly between scenes.

Fade time can be set differently for each scene, between 0-59 sec. Fade time from Off is capped at 5 sec.

Tested to withstand 15kV electrostatic discharge without damage or memory loss. Compensates in real time for incoming line voltage variations: No visible flicker with +/-2% change in RMS voltage/cycle and +/-2% Hz change in frequency/second. 10-year power failure memory automatically restores lighting to levels prior to power interruption. Faceplate snaps on with no visible means of attachment.

Low-voltage type Class 2 (PELV) wiring connects Control Units, Wallstations, and Control Interfaces. Up to 8 Control Units may be linked to control up to 48 zones. Up to 16 total Wallstations and Control Interfaces may be added for a total of 24 control points.

Relative humidity less than 90% non-condensing.