PulseWorx UPB Wall Controller with Load Dimmer, 7 Button, Light Almond

  

As a dual-purpose UPB controller, the PulseWorx UPB Wall Controller with Load Dimmer (7 Button) combines the functionality of PulseWorx's popular KPC Keypad Controllers with a 400W Dimmer Switch. The standard keypad portion controls UPB receivers around your home, while the dimmer portion enables both local and UPB remote On/Off/Dim control for a wired dimmable lighting fixture. Controls up to six UPB devices or scenes. Dimmer provides direct load control. Pre-programmed with 8 light scenes.

Can be a member of 16 different scenes. 16 function modes for each button. Fits in a single-gang box.

Each of the seven buttons on the keypad can be programmed to provide direct load control, remote control over other single UPB-enabled devices, or UPB scene control. The keypad itself can also be a member of up to 16 different scenes.

The keypad is pre-programmed with 8 preset lighting scenes, so you can create warm, welcoming moods with ease. The dimmer controls incandescent lights, low-voltage halogen, magnetic or dimmable electronic transformers (up to 4A).

You also have the option of setting the keypad to a non-dimming mode if you need to control non-dimming loads, such as fluorescent lighting. The keypad mounts into a standard single-gang box, so it can easily replace an existing switch. Buttons are backlit to provide easy viewing at night, and the brightness is adjustable. Power Requirements: 120 Volts AC, 50/60Hz. Two 16 AWG gauge, 105°C insulation.

AC Power Cord: NEMA1-15P 6 Foot Cable. Load: 400W / 4.0A. Standby Power Consumption: 0.8 Watts.

Environmental Conditions: Indoor Use Only. Temperature: -40 to 140°F (-40 to 60°C).

Humidity: 10 to 90 percent RH (non-condensing). Status LED Modes: All programmable with UPStart On, Opposite, Off, N/C.

LED Indicators: Blue, One per button; LED reflects status of Group. During Power Outage: Retains all settings in Non-volatile EERPOM. Setup Mode: Press and Hold ON/OFF Button for 3 Seconds. Button Type: 7 mechanical latching contact type buttons.

Mounting: Single-gang or multiple-ganged junction box. Dimensions: 4.12(H) x 1.75(W) x 1.20(D) inches. 6,734,784; 6,784,790; 7,265,654; 7,688,183.

And foreign patents may be pending.