10 Pack Super Slim Digital Dimmer Switch with MCU Smart-Chip Technology Offer

  

[10 Pack] Super Slim Digital Dimmer Switch with MCU Smart-Chip Technology Offering Widest Compatibility Range, Quiet Rocker, for Dimmable LED, CFL, Incandescent, Halogen, ETL Listed, White. Digital dimmers with an MCU controller are most energy efficient dimmers on the market and operate much cooler than conventional designs. There is temperature protection in the event the dimmer is overloaded. Turn your lights on to the exact brightness that you turned them off, even at the lowest dimming range.

Digital MCU controller remembers the exact brightness and turns them on to that exact level. Compact Slim Design for easy installation in electrical wall boxes where space is limited and other dimmers just won't fit.

MCU Technology gives the Widest Compatibility Range and can be used with 99% of the dimmable LED, CFL, Halogen or Incandescent Bulbs Lamps or Panels on the market. No Neutral Wire required and traditional single pole and standard 3-way wiring makes it easy to replace existing dimmers and switches. 15A/120V/60Hz 3-Year Full ETL certified. BESTTEN Digital Dimmers - Precise Light Control.

Installing dimmers in your home can help you save on energy by turning on the lights only as brightly as needed. It used to be that with old incandescent bulbs and traditional analogue dimmers you would not save much electricity by installing a dimmer as most of the energy would be lost as heat in the dimmer itself, but with Digital MCU Smart-chip Technology the dimmer does not heat up and that energy is not lost. When using a dimmable LED, the energy used is directly proportionate to the light output of the bulb.

Advanced MCU Smart-chip Digital Dimmer Technology. BESTTEN Digital Dimmers use MCU (Micro Controller Unit) Smart-chip to digitally control lights. Using this technology allows us to build the most advanced dimmers to date, with many advantages above the competition. How to change from a standard 3-Way switch. Take note that 2 of the terminals on the switch are the same color.

The wires connected to these terminals will be connected to the 2 red wires on your new dimmer. Mark these wires with a piece of tape.

The wire on the third terminal will be your line or load and will be connected to the black wire on your new dimmer. There may also be a green or bare copper wire attached to your old switch. This is the ground wire and will be connected to the green wire on your new dimmer. The ability to use these dimmers with almost any dimmable light, LED, CFL, halogen or incandescent bulbs, lamps or light panels is achieved with MCU Smart-chip technology.

This is a true leap in dimmer technology and have allowed us to offer the widest range of dimmable light compatibility to date. Digital MCU Smart-chip technology means the dimming is done electronically rather than conventional analogue methods. This means the new compact design offers the same capacity of a larger dimmer but in the slimmest possible size making installation a lot easier in wall boxes where there are many wires or where space is limited where other dimmers just won't fit. Our dimmers have an initial voltage adjustment wheel. The adjuster wheel can be rotated to set the initial voltage when the dimmer is set to the lowest level ensuring lights come on and are stable without flickering even at the lowest dimmer setting. 4.13 x 1.73 x 0.87 inches; 2.28 Pounds. 4.13 x 1.73 x 0.87 inches. Product Dimensions: 1.73 inches x 4.13 inches x 0.87 inches. We reserve the right to cancel any order for any reason at any time.

We are not responsible for undeliverable addresses. All of our items, unless otherwise stated, will only run on 120 volts. Please check to make sure your country complies with these specifications. We will work with you to resolve any problem you may have.