We use the images as provided by Varilight which show a reflection in each photo. The plate itself has no lines and is a consistent polished finish. Single plate size: 89mm x 89mm Double plate size: 89mm x 149mm 13A Plug sockets : Require a 35mm deep wall box. USB's are 2.1A.Rocker & Toggle Light Switches : 2 way (unless stated as intermediate), 10A rated and require a 25mm deep wall box. Ideal for incandescent lighting including mains and low voltage halogen.
400W have a minimum load requirement of 60W and maximum of 400W. Equire a 35mm wall box.Soft start feature and intelligent overload protection. Adjustable minimum brightness setting and choice of driving modes. Require a 35mm wall box. 5 Amp Socket: Require a 35mm deep wall box. Shaver Socket: Require a 47mm deep wall box. Dual Voltage Shaver Socket 230V/115V. Suitable for use in bathrooms, toilets and shower rooms (IP41). 230V accepts British and Continental round pin and Australia flat-pin.
115V accepts Continental two-pin and America NEMA. Cooker Switch: Require a 35mm deep wall box. Require a 35mm deep wall box.Holds standard 25.4x6.4mm fuse. TV Socket : Require a 25mm deep wall box. TV socket for use with male co-axial plugs.
20 Amp : Require a 25mm deep wall box. Fan Isolator : Require a 35mm deep wall box. 10A Fan Isolating Switch (3 Pole). Wide rocker for easy operation.Flex Outlet: Require a 25mm deep wall box. Can be used in a number of different environments for many applications. Clip in any combination of DataGrid modules (need to be bought from us separately).
Compatible with all standard Euro data modules (Varilight, Triax, RetroTouch etc). Create your own data combinations. Required depth depends on chosen module. Touch control or remote control from dedicated handset (not included, Varilight YRC8 can be bought separately), or can use a spare button on an existing handset e.
1-way or multi-way when used with V-Pro IR dimming slave unit(s). 1 Way unless used with a slave to make a multi-way circuit. Touch Slaves: Can not be used on their own, must be used with a master dimmer to make a 2 way or multi-way circuit.