G&H Deco Plate Mixed Brass DMB3 Light Switches, Plug Sockets, Dimmers, Cooker

  

Part of the G&H Deco Plate range. Deco design is made from 1.2mm thick brass pressing, it has a sloped step which makes this plate different to a standard Victorian stepped plate designs. The G&H Mixed Brass finished has a satin brass plate (which is brushed and lacquered) and then a polished brass edge. All G&H plates are manufactured to the highest standard from solid brass or steel and are covered by a 1 year guarantee.

All plates come supplied with two screws coloured to suit the plate. The entire range fits into UK standard wall boxes (see below for depth recommendations). Plate size: 94mm x 94mm (1 gang, 2 gang & 3 gang) Plate size: 154mm x 94mm (4 gang) Use as 1 or 2 way (1 gang intermediate also available) Required back box depth: 25mm or deeper Rated Amps: 10A.

Plate size: 94mm x 94mm (1 gang & 2 gang) Plate size: 154mm x 94mm (3 gang & 4 gang) Use as 1 or 2 way (1 gang intermediate also available) Required back box depth: 25mm or deeper Rated Amps: 10A. Single & Double Plug Sockets. Plate size: 94mm x 94mm (single) Plate size: 154mm x 94mm (double) Required back box depth: 25mm or deeper (recommend 35mm unless box is sunk into wall) Rated Amps: 13A DP.

USB Chargers: 1 side 1A & 1 side 2.1A. Push on/off and turn to dim. Plate size: 94mm x 94mm (1 gang & 2 gang) Plate size: 154mm x 94mm (3 gang & 4 gang) Required back box depth: 35mm or deeper 400W: 40w minimum load, 400w maximum load. Halogen Only 700W: 150w minimum load, 700w maximum load. Halogen Only LED: 1 to 10 LED bulbs (max 120W). 300W max load if used with halogen bulbs.

Use as 1 or 2 way (2 way only with an on/off switch). Plate size: 94mm x 94mm Required back box depth: 25mm or deeper Rated Amps: 20A DP (Double Pole). Plate size: 94mm x 94mm (single) Plate size: 154mm x 94mm (double with 13A socket) Required back box depth: 35mm or deeper Rated Amps: 45A DP (Double Pole).

Plate size: 154mm x 94mm Required back box depth: 47mm Rated Voltage: 115V240V AC. 2 & 5 Amp Sockets. Plate size: 94mm x 94mm Required back box depth: 25mm or deeper Rated Amps: 2A / 5A.

TV, Satellite, RJ45, BT, Fuse, Flex, Triax, Phono & Fan Isolator Sockets. Plate size: 94mm x 94mm Required back box depth: 25mm or deeper.

Plate size: 94mm x 94mm (single) Plate size: 154mm x 94mm (double) These are empty designed for modular inserts to clip in. Required back box depth: Depends on module type. Plate size: 94mm x 94mm (single) Plate size: 154mm x 94mm (double) Required back box depth: 16mm or deeper.